HUITIAN 3PLY Single Use Medical Face Mask, 40 x 50 Pack (2,000 Masks)

Description These face masks bear CE marking to demonstrate compliance with MDD 93/42/EEC Annex I Health & Safety requirements - EN 14683 : 2019 - Medical Face Masks Features: Single Use Shaped Nose Clip Ear Loops 40 x 50 Pack (2,000 Masks) Instructions for use: How to put on the face mask - 1. Clean your hands with soap and water or hand sanitizer before touching the mask. 2. Remove mask from package, take out the mask, hold by the two ends/ear lopps with the nose bridge at the top - white side should be facing towards the inside to touch the face, blue side should be facing to the outside. 3. Cover the nose, mouth and jaw with the mask and loop the ear loops over each ear. 4. Adjust the position of the mask, mould or pinch the stiff edge over the bridge of the nose for a comfortable fit. 5. the mask should cover the nose, mouth and chin at all time during wearing. 6. At no time should the mask hang around the neck of the wearer. How to remove the face mask - 1. Clean your hands with soap and water or hand sanitizer before touching the mask. 2. Avoid touching the main part of the mask as this is contaminated, only touch the ear loops. 3. Hold both of the ear loops and gently lift and remove the mask, 4. Dispose of the mask according to the requirements of the hospital or environmental protection department. 5. Clean your hands with soap and water or hand sanitizer. This product should be stored in a cool, dry, corrosive gas free, well ventilated and clean environment.